Boosted Board Error Codes 3 Flashing Lights Code Is An

Boosted Board Error Codes 3 Flashing Lights Code Is An

THE POSSIBLE CAUSES FOR THIS FAULT: The error code is an indication of a heating element fault The cooking surface is still hot The appliance is displaying 8888 or the entire display lights up then emits a sound (beep) WARNING Before you do anything to your appliance, make sure you disconnect it from the power supply.

Wear suitable protective gloves if you need to dismantle anything.

Usually, these codes indicate a problem with a heating element (e.g.

Refer to your hobs user manual to find out the specific meaning of the error code displayed.

The cooking surface is still hot If your electric ceramic hob displays a H when you switch it off, this simply means that the cooking surface is still hot (i.e.

C: a lower-case h indicates moderately hot; a H indicates DEFINITELY TOO HOT TO TOUCH).

You will therefore need to wait a few minutes for the cooking surface to cool before the H goes off.

If, however, the H continues to be displayed, this will likely be due to a fault with the temperature sensor on the inductor.

The appliance is displaying 8888 or the entire display lights up then emits a sound (beep) This normally occurs: When water gets underneath the touch panel, regardless of whether the hob is on or off.

Or when the touch panel area of the cooking surface has not been cleaned properly.

The issue can even be due to too much light shining on the touch panel (from the cooker hood for example), which can produce a fault and thus cause the appliance to emit a beep.

Thoroughly cleaning the glass ceramic surface and, if necessary, switching off the power to the hob for a few minutes can normally help to restore it to normal operation.